#Meade autostar software update serialI finished off by updating my Autostar Update (AUS) Client Application Software to Version 4.6 on my PC, but you don’t need a usb to serial cable to do this. #Meade autostar software update installAll of which were easy to install via the Meade control panel on the PC. #Meade autostar software update driversThe first thing I did once I got the PC drivers installed was to update the Autostar software to 4.2g and to upload the latest autostar tours, comets, asteroids and satellites. AutoStar Update: AutoStar Suite Version 5.5: The open architecture of the Meade Autostar permits the update of operating software, the loading of events such as comets, satellites, and minor planets, and allows you to share or clone this information with other Autostars. Make sure that your PC COM port is set to the same as the Meade software Com port in order to get the telescope to talk to the PC. The Serial connection defaulted to COM Port 5, although the Meade software only really gives you the choices of COM1 – COM4, so I changed the COM port of the cable on the PC in properties of the cable to COM1 for ease of use. Then just connect the cable you purchased to the supplied Meade LX200 cable and adaptor. ![]() HS-232-340.exe – USB to RS232 Cable Adaptor Driver for Windows The CD that came with the adaptor contained many different adaptors, but luckily the code of the driver folder required is actually the name on the adaptor cable at the serial end on the plastic sleeve. I have my com port set to 9600 bps, 8 data bits, parity none, 1stop bit, Flow control none. I found that the accompanying mini CD would not actually be read by my laptop cd drive, so I hunted around the internet for drivers, and I tried absoultely loads, but none of them worked, in the end I put the mini CD in my desktop PC and it read the disc ok.īut because some people may not have more than one PC I shall place the driver I used on this page in case I or anyone else needs it in the future. I had Meade check out the RS232 ports, and they say the RS232 ports are okay, but I still cant use the Autostar Update Program (v.3.61). Once I had received the cable from Hong Kong which cost me about £4 including delivery I had to install the drivers. I went for the cable and purchased it on eBay. Autostar Update is an application that functions to transfer the event files and software updates from your computer, through the serial port, USB or Connector Cable Set. ![]() So what can you do? Well you’ll probably need a USB to Serial cable or adaptor. Another problem is that most newer laptops also don’t have serial connections, it seems now that the newer the laptop the less ports it actually has. Although most people probably don’t use a desktop PC with their Meade Telescopes unless they have PCs in their observatories, they would probably instead have a laptop. ![]() The only problem with serial connections on a PC is that some newer PC Desktops don’t have serial connections on their motherboards anymore, as I found out when I built my own new Core Duo PC earlier this year. I would have thought by now that Meade may have added Firewire or USB to the LX200 range, but I must admit that RS232 is such a well known standard that it could be used for a while yet. I was quite amazed to find out that Meade still only allow you one way to connect your telescope to your PC, which is via an RS232 cable / 9 pin cable, the other end plugs into the RS232 slot on the LX200 base.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |